|
|
#16 |
|
Registered User
Join Date: May 2004
Location: vernon
Posts: 653
|
Re: 4 link
Go evolution joints. Heims only work good until you start breaking them.
__________________
One of the Gear Centre Group nutcases. |
|
|
|
|
|
#17 |
|
Moderator
Join Date: Sep 2000
Location: Wa state USA
Posts: 9
|
Re: 4 link
Depends on Brand and style of heim. And in some apps there is not always enough room for that large of a link end.
__________________
JLC SN-FAB. com A thanks to supporting companys for S&N FAB team #198KOH 09 Superior axle, BC4x4.com, Bilstein shocks , Randy's custom exhaust, QA-1, Beard seats, Tom woods, Longfield super joints , BFG, Trailready, and Dynatrac |
|
|
|
|
|
#18 |
|
Registered User
Join Date: May 2004
Location: vernon
Posts: 653
|
Re: 4 link
There's always room on any buggy for quality. My Small evo's don't take up much more room than a 3/4" heim.
__________________
One of the Gear Centre Group nutcases. |
|
|
|
|
|
#19 |
|
Registered User
Join Date: Sep 2009
Posts: 54
|
Re: 4 link
Dave. Let me know what hiems you need. I'll get ya hooked up. What are you doing for your steering? Do you have my old ram? What joints do you need for that as well?
The through hole can be changed to fit your needs. As well the aluminum joints are not available to the public yet. Info for you LARGE Large body 3/4 inch hole Material 4140 HTSR Ball diameter 1.75" Body width 1.625" Body diameter 3.24" Shank diameter 1 1/4 Thread length is 2.875" Overall length is 6.267" (tip to tip) Center of bolt hole to shank tip is 4.647" LARGE 1-1/4" 12TPI thread with 3/4" bolt hole - 28 degrees Mass without bungs or nut is 4.2 lbs MED Medium body 3/4 hole Material 4140 HTSR Ball diameter 1 3/8 Body width 1 1/4 Body diameter 2 3/4 Shank diameter 1 or 1 1/4 Thread length is 2 3/8 Overall length is 5 1/4 (tip to tip) Center of bolt hole to shank tip is 3 13/16\ MEDIUM 1-1/4" & 1" thread with 5/8" bolthole - 28 degrees SMALL Small Body 3/4 hole Material 4140 HTSR Ball diameter 1 3/16 Body width 1 Body diameter 2 1/4 Shank diameter 3/4 (7/8 and 5/8 not regularly stocked) Thread length is 2 3/8 Overall length is 4 7/8 (tip to tip) Center of bolt hole to shank tip 3 3/4 SMALL 3/4" & 7/8" thread with 3/4" bolt hole - 28 degrees FRANKENHEIM Frankenheim body 1 1/4 or 1.0-inch hole Material 4140 HTSR Ball diameter 3.2 Body width 2.600 Body diameter 5.184 Shank diameter 2.0" Thread length is 4.2 " Overall length is 10.027" (tip to tip) Center of bolt hole to shank tip is 7.435" Width of Ball across flats is 2.800" Weight Assembled without bung or nut is approximately 17lbs Franken hiem next to a large. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|