What the largest tire you can fit on a stock s10 blazer 4x4?

Page 1 of 2 12 LastLast
Results 1 to 15 of 17
  1. #1
    Registered User
    Join Date
    Jul 2002
    Location
    gibsons
    Posts
    526

    What the largest tire you can fit on a stock s10 blazer 4x4?

    What the largest tire you can fit on a stock s10 blazer 4x4? Like can you fit 31's or 32's without a lift? Or do you have to stay with the dinky little 235/75r15's ?

  2. Remove Advertisements
    BC4x4.com
    Advertisements
     

  3. #2
    Redneck Beast's Avatar
    Join Date
    Jul 2002
    Location
    Langley
    Posts
    1,119
    how much do you like your fenders?


    enough hacking and you could fit anything you want

    some minor trimming should be enough to clear 31s
    Sasquatch for Hire... will work for beer.
    07 Ranger FX4 - 4.0, 5spd, 1354, 4.10 L/S, 32s
    89 4Runner- Here we go again....

  4. #3
    Registered User
    Join Date
    Jul 2002
    Location
    gibsons
    Posts
    526
    i'd rather not trim fenders if possible. How hard is it to do a small body lift on these things?

  5. #4
    Registered User
    Join Date
    Oct 2003
    Location
    Mission, BC
    Posts
    208
    I had a 86 S10 blazer, with 30 X 9.5 tires, with new shocks and good springs it used to rub occaisonally
    The older I get, the better I used to be.
    89 YJ, 3 inch body lift and SOA conversion. 33 inch Geolander tires
    Stock 94 Exploder

  6. #5
    Registered User
    Join Date
    Mar 2003
    Location
    Calgary, Alberta
    Posts
    106
    I had a 92 S10 with 30x9.50 Grabbers on it and you had to wheel it pretty damn hard to get it to rub (torsion bars were cranked and had heavy duty rear leafs in it).
    With a 2 or 3 inch body lift you can fit 31x10.50s on them.

  7. #6
    Registered User
    Join Date
    Feb 2004
    Location
    Kelowna BC
    Posts
    221
    If you crank the torsion bars a bit you can squeeze 31x10.5's but they will rub a small bit. To even it out the rear you can use longer shackles, or re-arch the rear springs up 2-3"
    hope this info helps you out.
    1980 Chevrolet K30 5.7L Vortec, 4L80E NP205, 10" lift, 5:13 Gears, T-Locker Front Dana 60 , Detroit Locked Rear 14 bolt, 37/13.5R17 M/Ts, OTT Cross Over Steering 94 Jeep YJ, Turbocharged 2.5L, 4" Lift, 33" M/Ts

  8. #7
    Registered User
    Join Date
    Mar 2002
    Location
    Chilliwack
    Posts
    280
    I ran 31's with a T-Bar crack and add a leafs for a long time, they rubbed but nothing real bad.
    Paint? Ha, who needs that.
    87 S-15 Jimmy SFA...
    Bigger IS Better

  9. #8
    Registered User
    Join Date
    Feb 2004
    Location
    Cobble Hill, Vancouver Island
    Posts
    48
    im runnin some 38's on mine haha jk, after i do a SAS, but for now i got some 31's that should do the trick

  10. #9
    Registered User
    Join Date
    Oct 2003
    Location
    Abbotsford
    Posts
    121
    my buddy had some 30's on his 91 S10 blazer...now hes got a 3 inch body lift so i'm pretty sure he wants to hack the fenders and put bigger meats on

  11. #10
    Registered User
    Join Date
    Dec 2002
    Location
    Nova Scotia
    Posts
    50
    i have a 2in body lift with 31s ....they do rub a little ...
    91 Tracker with 33 swampers dual t\case lockrite 8000 warn now sas ...toys going in next .93 S-10 swb with 31 at's 194? 15 cwt with 10.00 20'sMUDDER CHUCKERS

  12. #11
    Registered User
    Join Date
    Oct 2002
    Location
    Qualicum Beach
    Posts
    79
    I ran 31x10.5x15's with no lift & no trimming. I had to remove the black plastic flares and grind down half a head of a bolt on each side, then they didn't rub. My vehicle is a 88 S10 Blazer.

    Now I'm running 31x10.5x15's with 3" lift and my flares are back on. I figure I could fit some 32's under there, and they'd just make it.

  13. #12
    Registered User
    Join Date
    Mar 2004
    Location
    your wifes house
    Posts
    1,962

    what size tires

    on my s15 jimmy i have 31x10.5/15 and they fit quite well yet when going through the mud u will expect to have the front tires rip the top of the wheel well apart a bit and it will probly take some tread with it

  14. #13
    Registered User
    Join Date
    Mar 2004
    Location
    Chwk
    Posts
    43
    I run 255 50 16's, and they seem to rub (the pavement) everywhere I go. hehehe!
    Opponents in the rear view mirror, is a good thing!

  15. #14
    Registered User
    Join Date
    Jul 2001
    Location
    Maple Ridge
    Posts
    1,019
    31 x 10.5 will fit nice. But they will rub on the lower part of the firewall side of the fender, and you will have to loose or trim the stock flares. I fit 33's on a blazer and a pickup with just a 3" body lift and some sawzall work.
    One of those KOH race things
    Big Country Customs
    Ruffstuff specialties
    Sharp-rite Tooling & Mfg.
    F-O-A
    CrawlinBC
    Amsoil

  16. #15
    Registered User
    Join Date
    Nov 2003
    Location
    Chilliwack BC
    Posts
    435
    I had a 1988 S15 Jimmy, I had 31x10.50x15 Hankook MT's
    I ran them On it Stock, they Rubbed only on the Lower Firewall Fender Bolt!, I removed the Bolt, and Riveted the fender skirt,
    no more rubbing, Only rubbed during anytype of Flexing.
    I went to a 2" body lift, and nolonger rubbed.
    Now i run 31x10.50x15's on my Stock S10, and theres no rubbing
    weird eh!
    82 SJ410

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •