Question????

[7-up]

I need new rear bushings for my 87 Pathfinder, does anyone know the exact part numbers or an aftermarket part source? I have looked and have not been able to track anything down.

Any help would be great.

Thanks.

[jnf]

Are these the linkage arm bushings?

[7-up]

This is what I was told should fix it, the symptoms & solution. Only problem is I can't find part numbers & I don't have use of a press. :help


"Vehicle wobble or shake in the rear at highway speeds or after driving over a bump: This usually indicates worn rear control arm bushings. Replacement of the bushings is a fairly involved task requiring use of a press. New bushings will solve this problem. There are two upper control arms and two lower control arms, with 16 bushings total to be replaced."

[jnf]

I bought a set of polyurethane bushings for my '89 from AC ( www.4x4parts.com ) in Florida 3 years ago for @ $200 + ##%^ brokerage fees. Just do one link at a time, cut the metal center to get the old one out, and use lots of grease to put the new ones in. Good luck

[7-up]

Anybody have a set of linkage arms with good bushings for sale?

Just thought I'd ask?

Thanks.

[jnf]

I have a set from a '95 that I am told work on the older models too. They have @ 100,000 km on them. $50

[7-up]

If they will fit I'll take them.

[jnf]

Originally posted by 7-up
If they will fit I'll take them.
PM me with a contact # and I'll call you.