|
Toyrantula February 5th, 2002, 11:15 pm Just wondering if the hi output (performance) oil pumps are worth the extra money? See them advertised quite abit. ------------------ TOY`s Phoenix Gold Car Audio webpage (http://www.geocities.com/toyrantula/index.html) Twigman February 6th, 2002, 10:00 am I would stick with the stock toyota pump, after market crap like that is only good for american made auto's. ------------------ Treading Heavily dp February 6th, 2002, 01:32 pm A pump that puts out to much pressure can wash the bearings, leading to early failure. Stick with the stock pumps for reliability. ------------------ 75 FJ40, 4 inch BDS springs, 1inch body, 35's, detroit EZ locker, power steering, disc brakes, 3spd low range gears, full cage, XD9000i, extended shackles, dual batteries....you get the idea. Tim Thorbjornsen February 6th, 2002, 10:26 pm My thought is there just and easy way to get oil pressure on a dying motor with shot bearings so i'd stay away from them the serve no real perpose the oe replacements are perfect Toyrantula February 6th, 2002, 11:12 pm I had thought about putting the hi volume pump in. Thought it might make sence , since I will also be doing the cam and exhaust (header). Was hoping for a higher RPM range in the powerband. ------------------ TOY`s Phoenix Gold Car Audio webpage (http://www.geocities.com/toyrantula/index.html) | |