|
BBP January 18th, 2002, 01:27 am Anyone on here run stock Wagoneer leafs on their Toys? (not the 44044's) ------------------ '86 Toyscrota, currently in too many parts to count. "Pushing the limits of duct tape and zap straps every day." RedApe January 18th, 2002, 03:09 pm I do...in the rear. What would ya like to know...? ------------------ Keith (aka RedApe) 82 Toy http://www.island4x4.com Victoria BC BBP January 18th, 2002, 04:53 pm I have some for the front but I need to clear 35s (and eventually 36s http://www.bc4x4.com/ubb/biggrin.gif ) with them. Was thinking of doing a 2" dropped spring hanger (which would lift it 1" correct?) and make up for the rest of it with shackle ( http://www.bc4x4.com/ubb/smilies/cwm19.gif ) I'd like to get around 6" of lift but I'm starting to think that unless I want to do huge shackles (and why shouldn't I) it's not going to happen. I'm planning on cutting the fenders any ways. ------------------ '86 Toyscrota, currently in too many parts to count. "Pushing the limits of duct tape and zap straps every day." RedApe January 18th, 2002, 06:21 pm I have done the 2" drop hanger, as well as large shackles. The spring packs I have in the front are actually rear CJ5's. I am about 5.5" higher than stock. http://island4x4.com/4x4tech/suspension/images/toy_dropbracket.jpg I run 33's, and don't think I would want bigger...these almost hit fender wells at full stuff as it is... http://www.bc4x4.com/ubb/smilies/cwm4.gif Driveline (pinion <'s) are gonna be tough too...ask me how I know. ------------------ Keith (aka RedApe) 82 Toy http://www.island4x4.com Victoria BC [This message has been edited by RedApe (edited January 18, 2002).] MEK January 18th, 2002, 07:06 pm From what I understand a one inch drop hanger and a one inch longer shackle provides one inch of lift? I think it only nets 1/2 inch if you only do one end. Check DRM's site for a picture of a nice 3.5 inch drop hanger. If its not there now email me I think I have it save somewhere. Mike. ------------------ 85 Flat deck toyota, chevy's, new frame, for sale. morocco169 January 19th, 2002, 10:11 am How did you go about putting the wagoneer springs in the rear??? http://www.bc4x4.com/ubb/smilies/cwm30.gif http://www.bc4x4.com/ubb/smilies/cwm30.gif pitter January 19th, 2002, 12:15 pm To clear the tires in the front why don't you move the axle forward? ------------------ Sold 85 Toyota extra cab 4x4 2" lift 33" BFG M/T with lots of tire rub! Wanted 84/85 4runner, needed a few more seats less rust, and a beter FRAME. chris January 19th, 2002, 10:00 pm are we talking about front waggy's or rear waggy's. From what I have read there is a big difference. Something about one being spring over and the other being spring under. Anyone know anything about this? BBP January 20th, 2002, 05:12 pm The axle is going to be moved forward a bit I heard it needs to anyways for the oil pan to clear a hy-steer setup. RedApe - how long are your shackles in the front? Thanks for the tips http://www.bc4x4.com/ubb/biggrin.gif ------------------ '86 Toyscrota, currently in too many parts to count. "Pushing the limits of duct tape and zap straps every day." | |