PDA

View Full Version : 1989 Dodge Ram 3/4 Ton 8" lift 37" swampers w/ 2 Fullsize Spares



DodgeDave
October 13th, 2009, 03:01 am
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7135_268827840014_555325014_8941242_3241717_n.jpg
This is the most recent photo I have of it. of when it broke. this is it's current condition.

My yard is starting to look like a used car lot, im trying to sell off everything, and this is next on the chopping block.

the truck has served me well. It's got a 5" reverse shackle lift with a 3" body lift (the cab and front blocks still need to be installed but are included) with a total of 8" Dana 60 rear and dana 44 front with posi lok system.

The tires are 37x12.5x16.5 super swamper radials with a good amount of tread left. and it comes with 2 basically brand new 37x12.5x16.5 BFG military oz tires on rims.

under the hood it has a strong 360 c.i. smallblock It's currently a 2 barrel intake and carb but I have a 4 barrel intake/carb that I'll include for free. it's backed up by a 4 speed manual. really smooth shifting. The it has a welded rear spyder professionally done no backyard bull****. the reg cab long box has had some body modifications I've replaced 90% of the body pannels on the truck (cab and hood are the only origional pieces left) It has offroad bumpers with a 8000 lbs warn winch. I have tonnes of spare parts that I can throw in.

Now the bad.
with any used truck there's going to be somthing wrong with it. Im going to tell you straight up, It will need to be towed home, I can supply delivery on most occasions it needs a new wheel bearing, spindle, dust sheild, and brake line for the front passenger side only. Other than that it's a great truck.

Looking for 3000$ **OBO** don't feel afraid to shoot me an offer, just don't insult me.

I don't have any recent pictures. But i will take some in the next few days.
Thanks for the interest.
Dave

DodgeDave
October 15th, 2009, 04:40 am
New price 2300$ FIRM I need this gone. I can supply delivey

454_LPG
October 26th, 2009, 12:37 am
you selling the rubber off her, if so what exact tires they are, load rating and some pics would be great.

DodgeDave
October 28th, 2009, 01:58 am
the tires are 37x12.50x16.50 super swamper radials and the 2 spares are BFG millitary oz same size they probably have a good 60% for the right price ill let em go. but im not 100% because I'd need new tires to replace these ones if i sell them.

beerwagon302
November 23rd, 2009, 06:09 pm
if the wheel bearing is fixed ill buy it!!

DodgeDave
November 23rd, 2009, 11:17 pm
It's not fixed. im trying to find a front dana 60.

mondujen
December 10th, 2009, 03:27 pm
how long have you had the truck? wanna trade for a white 1990 2dr cherokee.

DodgeDave
December 10th, 2009, 08:15 pm
i've had the truck scince the end of summer so not long at all.

send me pics of the cherokee david_verbeek99@hotmail.com

mondujen
December 10th, 2009, 10:11 pm
I was joking. I traded that truck for the cherokee. That was my old bush beater. Loved that truck and absolutely regret trading. All of the drivetrain (except for the front axle) would be perfect for my cj-7 but I have no space to do the swap.

mondujen
December 10th, 2009, 10:16 pm
Just so you know its not a 2 barrel carb it is tbi. I would'nt swap the tbi for a 4 barrel carb and the shackle flip may have got 5" of lift but I also removed the 3" factory block. blah blah blah I did alot of little things to that truck. If you look close at the rear bumper tow points you will see that you could probably lift the truck completely off the ground.

DodgeDave
December 11th, 2009, 01:02 am
are you sure your thinking of the same truck?

mondujen
December 13th, 2009, 08:01 pm
On the rear axle the shock mounts are welded to the axle tube and the u-bolts are flipped bolt up. factory has the bolts down and the shocks mount to the lower plate. That front bumper was my first attempt at making a bumper. I would'nt trust the tow loops for a hard yank. I also painted the diff covers red. The body was beat to **** because I used it to beat on. I hacked the hell out of the front fenders (thats why you did some body parts swapping) to clear 40's with no more than 2"s of lift but never got around to finding a dana 60 front. I knew that 37's were way to big for the cad dana 44 but it was a beater so I did'nt care. Blah blah blah

DodgeDave
December 13th, 2009, 09:21 pm
Oh good stuff! yeah i was looking at the loops on the front bumper and i wouldnt really trust them too much. but deffintly a solid bumper props to you!

the only stock body pannels on it pretty much is the hood and the cab. I had the extra pannels there so might aswell. i did find 1 ton axles for it with a 6" leafs and 44" swampers but the guy was asking a bit much. but bassically that's what I have plans for it so far. other than the spindle and wheelbearing the truck drove fine and i really enjoy having it.

DodgeDave
January 24th, 2010, 09:33 pm
this truck is no longer for sale i've decided to keep it for the meantime.
i recently bought 1 ton axles for it and another 8" lift.

might possibly go up for sale in the near future. but untill then this ad can be deleted