PDA

View Full Version : nv4500 tranny


K5
September 22nd, 2009, 07:08 pm
220k on it. ran perfect. 1200 obo

DieselGuy
September 24th, 2009, 10:28 am
What yr is it from? ....T-case?

K5
September 24th, 2009, 07:31 pm
it came out of a 96 dodge diesel, and im not too sure what t case but i know the 205 bolts to it

Nissan Nick
September 24th, 2009, 08:30 pm
it came out of a 96 dodge diesel, and im not too sure what t case but i know the 205 bolts to it

for those interested, that means it was bolted up to an np241, and the ouput shaft is a higher spline than that of the gas motors, so it will only work with the diesel transfer case as far as np241s are concerned

DieselGuy
September 27th, 2009, 04:08 pm
So it will bolt to any np205? or need a diesel specific case?

sdubfid
September 27th, 2009, 06:09 pm
I know dodge np205s had different spline counts for auto and standard

PembyRunner
September 29th, 2009, 09:43 am
Bellhousing? Flywheel? anything else available.

WC53
October 1st, 2009, 08:54 pm
Dodge diesel NV4500 has 29 spline output . NP205s do not bolt up without some fiddling and the only one that might fit is one from a 89 - 93 Dodge diesel . Most other Dodges had 23 splines . Chev 32 spline and 20 something , Ford 31 spline

DieselGuy
October 1st, 2009, 09:29 pm
Ok thanx for the info ...ya i don't want to try to piece everything togeather ...i'll just find a complete setup that works

K5
October 3rd, 2009, 10:45 am
actually advanced adapters makes a kit that includes everything to bolt these up in any vehicle for only like $400, so u dont need to do any fiddling around

K5
October 6th, 2009, 09:04 pm
and it has a bellhousing with it too