runnerguy
August 17th, 2009, 06:59 pm
I no longer have time to finish this project and have decided to part so here is the list.
1 set of rockwell axles:
FRONT (U-JOINT)
- rebuilt with new timkin wheel bearings
- new one piece axle boots
- new upper kingpins/bushings, lowers look like new
- grade 8 bolts all replaced where needed
- new, never run detroit locker installed
- new carrier bearings ( timkin )
- axle cleaned and assembled ( all lucas grease/lube,does have 4 link mounts )
- new wheel studs and nuts ( all right hand )
- knuckles have had the Evolution tie rod flip ( drill and tapered insert for tie rod on top )
REAR
- cleaned and new carrier bearings ( timkin )
- welded spiders ( not to the carrier )
- extra set of spiders and cross, encase you want an open diff
- new wheel studs and nuts ( right hand )
$3200
One Evolution Machine rockwell pinion brake kit
- two wilwood calipers and two sets of pads
- two rotors
- two caliper mounts
$700
hyd steering setup
- 3x8" ram
- two Evolution ball socket joints
- four threaded inserts and locknuts
- three feet of 2" DOM
- two rockwell tie rods
- hyd orbital valve
$700
set of four 49x21x20 interco iroks never used just mounted for mockup
$2600
set of four 20x10" double beadlocks with rockwell pattern steel with all inserts and bolts ( painted black )
$1200 Tires are mounted on the rims will seperate for the right buyer.
Will add more as I go.................... prices are neg. depending on what you buy. I can send pics by e-mail starting wednesday. located in Kelowna.
1 set of rockwell axles:
FRONT (U-JOINT)
- rebuilt with new timkin wheel bearings
- new one piece axle boots
- new upper kingpins/bushings, lowers look like new
- grade 8 bolts all replaced where needed
- new, never run detroit locker installed
- new carrier bearings ( timkin )
- axle cleaned and assembled ( all lucas grease/lube,does have 4 link mounts )
- new wheel studs and nuts ( all right hand )
- knuckles have had the Evolution tie rod flip ( drill and tapered insert for tie rod on top )
REAR
- cleaned and new carrier bearings ( timkin )
- welded spiders ( not to the carrier )
- extra set of spiders and cross, encase you want an open diff
- new wheel studs and nuts ( right hand )
$3200
One Evolution Machine rockwell pinion brake kit
- two wilwood calipers and two sets of pads
- two rotors
- two caliper mounts
$700
hyd steering setup
- 3x8" ram
- two Evolution ball socket joints
- four threaded inserts and locknuts
- three feet of 2" DOM
- two rockwell tie rods
- hyd orbital valve
$700
set of four 49x21x20 interco iroks never used just mounted for mockup
$2600
set of four 20x10" double beadlocks with rockwell pattern steel with all inserts and bolts ( painted black )
$1200 Tires are mounted on the rims will seperate for the right buyer.
Will add more as I go.................... prices are neg. depending on what you buy. I can send pics by e-mail starting wednesday. located in Kelowna.