PDA

View Full Version : scout axle set - cut and turned + etc

DBD2
July 6th, 2009, 08:55 pm
scout axle set - cut and turned
3.54's
open diffs dana 44's

front full size axle shortened and knuckles turned using scout axle shafts inside.
good caster, alot of pinion angle for big lifts for use with a front cv-driveshaft

300$ o.b.o.

ETC

empty rear dana 44 housing - scout
spare rear axle shaft - scout dana 44
spare front spindle
set of scout front spare axle shafts dana 44
dana 44 front housing shortened/turned - good caster - mild pinion angle - designed to use scout axle shafts
scout dana44 limited slip carrier with 373 gears

$offers
MudKick
July 7th, 2009, 08:17 am
spare rear axle shaft - scout dana 44


How much you're thinking?$?$?$?
DBD2
July 7th, 2009, 04:49 pm
What stuff do you want,....

The complete two axle set, hub to hub, I posted 300$
As for the additional parts it depends what you want.

I could do a package deal if need be.

Darrell
MudKick
July 8th, 2009, 07:19 am
..uhh... as quoted:

"spare rear axle shaft - scout dana 44"

:whiteflag:

Just that. I'm planning on abusing my rear end.... ehmmm, never mind...

How much?
Tehaids
July 8th, 2009, 10:08 am
I'm planning on abusing my rear end....

How much?

Ah hahahahaha
DBD2
July 8th, 2009, 07:43 pm
sorry, didn't see your caption, was inebriated when I checked the message.

Rear spare axle shaft.....I will throw out a number of..... 50$ ish
gnelson
July 11th, 2009, 10:16 am
I'm interested in the pair. could you send me your contact info.
DBD2
July 11th, 2009, 03:13 pm
bump
DBD2
July 26th, 2009, 09:51 am
ttt
DBD2
July 26th, 2009, 08:02 pm
Most has sold,

What remains is,

dana 44 rear housing - scout with limited slip carrier with 373 gears no axle shafts or brakes
50$

dana 44 front housing shortened/turned - good caster - mild pinion angle - designed to use scout axle shafts, with 373 pinion and matching ring gear, no carrier though
50$

DBD
mondujen
July 28th, 2009, 11:11 am
Can you pm me a ph#

I have a couple of scout 44's I wanted to put in my cj but the cut and turn has stalled me.

If your housings will work I could swap all my parts over.

Is your cut and turn caster and pinion angle good for a cj with 2.5" lift springs?
DBD2
July 29th, 2009, 04:57 pm
give me a call anytime after 5:00

All the stuff will swap in easily,
You will have to move the spring perches for your application.

778 317 5170

Darrell