Hino 6x6 truck for sale

[Tmax]

i am selling my project 6x6 hino truck. plans have changed and can no longer finish the project. have been collecting parts for the last two years and have spend counless hours on details.

it rides on 6 micheling 46 inch tall zmlx tires with double beadlock wheels including a full size spare. the wheels are epoxy primed and painted with Endura.

motor is a 3.8 litre turbo diesel with exhause brake.

transmission is stock 5 speed. transfer case is from a duce and half 6x6 m35. total reduction is almost 100:1


here are some pics.


http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/047.jpg

http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/056.jpg

http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/058.jpg

all new hardware and new suspension links

http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/038.jpg

battery tray for 3 optima batteries. (have not had a chance to purchase the third one)


http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/026.jpg


http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/027.jpg

large valve stems for super fast airing up and down.

[IMG]http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/053.jpg


http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/040.jpg

three ten gallon air tanks for tons of stored air. also included are three york comps.

http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/042.jpg

onan 6000 watt RV slide out generator wich will mount on the pass side right behind the brake boosters.

http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/025.jpg

two long storage boxes from ex fire truck to be mounted either above or bellow deck.


http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/051.jpg

all the manuals you would need to service any hino truck

http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/044.jpg

two millitary rebuild fresh drive shats. they require to be shortend for front and back to fit. right now it only has a temp shaft so i can drive it around shop.

http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/052.jpg

http://img.photobucket.com/albums/v212/ssyyzz/6x6-sale%20pics/036.jpg


two spare transfer cases. plus $500 worth of new bearings. the current case right now is a millitary rebuilt air shifted unit in the truck.


the project needs to be finished. right now it needs brake lining and brake lines, front bumper and valance, rear bumper and taillight wiring, and one of the rear pumkins needs new bearings. the rear diffs have all new wheel bearings.

all parts are blasted and painted with POR15. i spend about 3 mounths full time last year to get it to where it is right now. it was supposed to be ready for the whipsaw trip but never happened.


price is $10000. i may consider interesting trades that take less room. also consider high end firearms or ATV for trade.

[Reaper]

wanna sell one of those yorks?

[On_22s]

cool truck, why does it need air compressors?

[Tmax]

wanna sell one of those yorks?


right now i like to sell everthing as whole. there are probably all kinds of other stuff that i forgot to mention. if it doesnt sell, i may part it and you will be the first to get a york.

cool truck, why does it need air compressors?

for on board air. also the transfer case is air shifted from 4 to 6 wheel drive.

[EB4x4Bronco]

I'd also be interested in a york if parting out...which model are they, do you know?

[desteurm]

Sorry to here your selling this AMAZING truck.

[4Lo]

Well all I cansay is good luck with the sale sass. I'm not sure what kind of market there is for a project such as this in BC. Did you list it on ebay??

[jeeper]

Well all I cansay is good luck with the sale sass. I'm not sure what kind of market there is for a project such as this in BC. Did you list it on ebay??



Its all your fault hes selling Steve !

He saw your solid axle swap for a dakota and realized this unit just wasnt cool enough to keep up with you :)

Bruce

[4Lo]

Its all your fault hes selling Steve !

He saw your solid axle swap for a dakota and realized this unit just wasnt cool enough to keep up with you :)

Bruce

Yeah I know yal want to be like me.:cwm30:

[ryanmacneil8448]

put me down for a york if you decide to seperate would ne a nice addition to the mog

[Tmax]

thanks everyone for their compliments. at least who ever buys it wont have any troble selling the extra compresors




by the way i also have a two cylinder bendix that forgot to list that also is included in the package. its much bigger than a york. liquid cooled and 100% duty cycle.

[gavman]

Too bad its LHD, otherwise it would be sold:canadian

[HMFI]

That would make a cool welding rig..............................

[canucksafari]

Too bad its LHD, otherwise it would be sold:canadian


Shhhhhhh. To much competeion for the RHD as it is now. :p

Tmax, sorry to hear you won't be the one to finish this rig. Hope whoever the lucky bugger is who buys it continues to let us watch the build go along. :beer

[Enigma]

Cool ride Sass! I cross posted this over to Ih8mud.com for the lookyloo's there as well for ya.

http://forum.ih8mud.com/vehicles-trailers-sale-wanted/270806-hino-6x6-project.html#post4205784

[Tmax]

Cool ride Sass! I cross posted this over to Ih8mud.com for the lookyloo's there as well for ya.

http://forum.ih8mud.com/vehicles-trailers-sale-wanted/270806-hino-6x6-project.html#post4205784


cool. thank you.

:beer_cheers:

[canucksafari]

Cool ride Sass! I cross posted this over to Ih8mud.com for the lookyloo's there as well for ya.

http://forum.ih8mud.com/vehicles-trailers-sale-wanted/270806-hino-6x6-project.html#post4205784

Personally, I think the Coastal Cruisers should have a support rig just like this one. I'm sure the club President would love to purchase it, finish the build and donate it to the club. Jeff, should you tell him of should I? :rolleyes:

[EB4x4Bronco]

Sorry, kind of selfish of me. I forgot to say that the truck is a neat looking project. Is it a project just to have? What was your original intended purpose for the truck? Was just curious is all.

Maybe things will change again and you'll be able to keep it. Good luck.

[fish4life]

oh wow ... that thing is sweet. Love the detail work you had put in before calling it quits ... the wheels, the POR15 job, nice shiny hardware everywhere ... really hope you get a good deal for it :)

[Diesel_Canuck]

Wow, that's going to be a great truck once it's finished. If I'd known about it a year ago, I might have jumped at it, instead of building my turbo-diesel 404.

From looking at the images, I have a few questions:

1. Is the truck left-hand drive?

2. Was the Hino originally a 2-wheel drive?

3. Did you install the front axle spring-over-axle, then cut-and-shut (at an angle) the rear of the frame, so that the frame would be horizontal, and not be higher at the front?

4. How did you hook up the steering linkage?

5. Are the brakes hydo-boost or hydrovac?

6. Are the tires legal on the highway?

7. Is the 3.8 engine powerful enough to turn those tires at highway speeds?

I'd better stop looking at your truck, because the longer I look, the more questions I'll have.

[callan]

My brother is interested, could you email me your number so he can call you.

toychevy@shaw.ca

Thanks

Carson

[Tmax]

My brother is interested, could you email me your number so he can call you.

toychevy@shaw.ca

Thanks

Carson

sorry i forgot to inclued my number. you can reach me at 604-722-0175.

i'll be around during bussines hours all day tomorow.

[Tmax]

That would make a cool welding rig..............................

definatly. throw a camper on it plus a welder and head to the bush....

Personally, I think the Coastal Cruisers should have a support rig just like this one. I'm sure the club President would love to purchase it, finish the build and donate it to the club. Jeff, should you tell him of should I? :rolleyes:

sure why not. its already based on a toyota product.

Sorry, kind of selfish of me. I forgot to say that the truck is a neat looking project. Is it a project just to have? What was your original intended purpose for the truck? Was just curious is all.

Maybe things will change again and you'll be able to keep it. Good luck.

great question. the intend is simple. you can use it like a regular pick up truck. its the same size as a full size domestic with a bit better pay load. you can wheel, camp, explore or just use it as daily driver. that was the intend. also makes a good recovery or support vehicle.

oh wow ... that thing is sweet. Love the detail work you had put in before calling it quits ... the wheels, the POR15 job, nice shiny hardware everywhere ... really hope you get a good deal for it :)


thanks. i never intended to sell otherwise whould not have spend so much time on the details.


Wow, that's going to be a great truck once it's finished. If I'd known about it a year ago, I might have jumped at it, instead of building my turbo-diesel 404.

From looking at the images, I have a few questions:

1. Is the truck left-hand drive?

2. Was the Hino originally a 2-wheel drive?

3. Did you install the front axle spring-over-axle, then cut-and-shut (at an angle) the rear of the frame, so that the frame would be horizontal, and not be higher at the front?

4. How did you hook up the steering linkage?

5. Are the brakes hydo-boost or hydrovac?

6. Are the tires legal on the highway?

7. Is the 3.8 engine powerful enough to turn those tires at highway speeds?

I'd better stop looking at your truck, because the longer I look, the more questions I'll have.

the truck orginaly started out as a regular hino FB 3 ton 2 wheel drive. i pruchased it as an unfinished project from another member on the board and have spend the last two years working on it.

the motor is surprisingly nice. i shouldnt say this but it was spinning the wheels on dry ground really nice yesterday. i think its a perfect combo for economy and performance. and yes the tires are radial speed rated tires. they come on millitay 5 ton trucks.

[4Lo]

Don't you find that with the rear tandem setup you get a push effect when trying to corner?? Or maybe you have not experienced this since you have not driven it on the street.

[Tmax]

Don't you find that with the rear tandem setup you get a push effect when trying to corner?? Or maybe you have not experienced this since you have not driven it on the street.


no. the tandem set up has enough play in it to give even at full turn.

[Mike Wild]

you can use it like a regular pick up truck. its the same size as a full size domestic with a bit better pay load.


I actually can't belive my F250 extended cab is like 3 inches longer than this thing, I never would have believed it if Sass didn't make me take the tape measure out! Unfortunately, the f250 didn't qualify as an interesting trade! :(

[Bronco Boy]

Damn it Sass, that thing is sick looking. It looks like your are almost finished, well, other than the hotel that goes on top. :laugh

Good luck with the sale. :beer_cheers:

[jeeper]

Damn it Sass, that thing is sick looking. :laugh

Good luck with the sale. :beer_cheers:


Ive been watchin it as it progressed and sure would have loved to have seen it finished !

Hopefully someone local will get her as Id love to see her on the trails !


Bruce

[steelheadZJ]

wow thats a wild looking unit, nice work:beer good luck with the sale

[CDN-CUCV]

*drool*

Would you consider a '65 Pontiac Parisienne convertible? It's really nice!

That truck would definately make a killer welding rig.:cool:


Where are you located?

[Tmax]

*drool*

Would you consider a '65 Pontiac Parisienne convertible? It's really nice!

That truck would definately make a killer welding rig.:cool:


Where are you located?

hmmm. maybe. wasnt looking for another car but used to be a pontiac fan so maybe. give me a call tomorow (going to bed now)

604-722-0175

thanks, Sass

[TUNABOMBER]

Clearly Sas care not about the tuna's feelings on this one


What about my dreams man :angry:angry:angry



I was there from day one of this build and can tell you for sure that a lot of hard work and carefull planning went into this

who ever picks this thing up is gonna have one very cool truck


you suck sas :poke:

[Reaper]

This thing is so cool I went to the bank for a loan toady
(i Hate waiting for the call backs)

[Tmax]

This thing is so cool I went to the bank for a loan toady
(i Hate waiting for the call backs)

LOL. are you serious??????

[Mike Wild]

Clearly Sas care not about the tuna's feelings on this one


What about my dreams man :angry:angry:angry



I was there from day one of this build and can tell you for sure that a lot of hard work and carefull planning went into this

who ever picks this thing up is gonna have one very cool truck


you suck sas :poke:

:agree::withstupid:
:cwm23:

[Reaper]

LOL. are you serious??????

seriously

just waiting to hear back
wifes gonna kill me but eh its worth it lol

[Tmax]

seriously

just waiting to hear back
wifes gonna kill me but eh its worth it lol

LOL. ya i dont blame her.


well you got my number. just let me know and i'll warm her up for you. :redneck

[fingers]

****ty yer sellin sas man ,that a freakin great rig fo sure

[CDN-CUCV]

hmmm. maybe. wasnt looking for another car but used to be a pontiac fan so maybe. give me a call tomorow (going to bed now)

604-722-0175

thanks, Sass

Will do. I guess the race is on now. lol!

[shoobear]

What is the top speed?
Is it LHD?
Papers/BC regi?

[Tmax]

What is the top speed?
Is it LHD?
Papers/BC regi?


its regualr left hand drive and bc registered since new.

[gavman]

Yeah I know yal want to be like me.:cwm30:

Really:shakehead:

[ggillies]

hmmm. maybe. wasnt looking for another car but used to be a pontiac fan so maybe. give me a call tomorow (going to bed now)

604-722-0175

thanks, Sass

Or maybe another truck? I have a 51GMC I pulled apart again a few years back and never put back together again.

[Tmax]

Or maybe another truck? I have a 51GMC I pulled apart again a few years back and never put back together again.

hmmm. ok is it interesting? :p

[shoobear]

What is the truck rated for weight?
Expected top speed?
What are the width and wheel base measurements....

[ggillies]

hmmm. ok is it interesting? :p

Bright red, has a Camaro clip, 350 / 700r4 with all the work, etc, short box with teak floor. I smacked up the front fender and grill so I pulled it to bits intending to rework the grill which I'm not happy with, go injection, air con, power this and that and maybe chop the cab a bit. Ended up working on 4x4 projects since and haven't come back to it. Some photos at http://bit-rot.net/gmc/

[Tmax]

Bright red, has a Camaro clip, 350 / 700r4 with all the work, etc, short box with teak floor. I smacked up the front fender and grill so I pulled it to bits intending to rework the grill which I'm not happy with, go injection, air con, power this and that and maybe chop the cab a bit. Ended up working on 4x4 projects since and haven't come back to it. Some photos at http://bit-rot.net/gmc/

thats actually much cooler than i thought. right now i rather get cash or something i need though. thanks for your offer.

:beer_cheers:

[ggillies]

thats actually much cooler than i thought. right now i rather get cash or something i need though. thanks for your offer.

:beer_cheers:

I know what that's like. Cheers.

[Tmax]

What is the truck rated for weight?
Expected top speed?
What are the width and wheel base measurements....


factory gvw is 7500kg.

top speed should be over 100kmh

dont remeber the width but the wheel base is 144 inches measuring to the center of the rear diffs.

[240 Jordy]

How are we going to get the wrecks out of the Saw when you sell her?

You got something up your sleeve? . . . LOL!

[Tmax]

How are we going to get the wrecks out of the Saw when you sell her?

You got something up your sleeve? . . . LOL!


LOL. well if reaper gets it, he can bring it out this summer for the trip otherwise might have to go to plan B or something

[Robnoxious]

I have an 89 FD that needs a brake master. You wouldn't have one of those kickin' around, would you??

[Tmax]

I have an 89 FD that needs a brake master. You wouldn't have one of those kickin' around, would you??


sorry no spare parts. a master is not very expensive even new. try the hino dealer in surrey. they have lots of used parts.

[zedjay95]

this sucks i need a new wheeler but it's outa my price range and i need it to drive right away

[Tmax]

ya it needs a bit of work to finish.

[HMFI]

ya it needs a bit of work to finish.

Ya think?

That thing is cool for, um, cool stuff..............

Just finish building it, your probably the only one that knows how.:cwm30:

[Reaper]

well i am out of the running
bank gave a mortgage instead of the smaller loan
so instead of building a house on wheels i got to get a house mounted to the ground

[4Lo]

eveytime I look at that thing it looks more badass.

[Tmax]

Ya think?

That thing is cool for, um, cool stuff..............

Just finish building it, your probably the only one that knows how.:cwm30:

i wish i could. no time or money. i never intended to sell when i got started

eveytime I look at that thing it looks more badass.

thanks

well i am out of the running
bank gave a mortgage instead of the smaller loan
so instead of building a house on wheels i got to get a house mounted to the ground

too bad man. hey if you ever changed your mind, i would consider the right house for trade. :p



i'm actually amazed at the responces so far. even a bunch from the states.

oh and its still for sale. i may also consider nice tools for trade

[cambo]

how about a 91 Mercedes 600 sel amg v12 430 hp. 400 ft/lbs it has amg suspension and exhaust 19 wheels and fat Yokohama(new) tires rated to 300 km/h

[wjrudo]

What would it take to get it road ready?, and would you be willing to do the work if it would warrant a sale? I want to drive it to Minnesota. Some guy want's my MOG, and I would need a new project.
Why are you selling it? Did you run in to any difficulties in building it?

[Tmax]

What would it take to get it road ready?, and would you be willing to do the work if it would warrant a sale? I want to drive it to Minnesota. Some guy want's my MOG, and I would need a new project.
Why are you selling it? Did you run in to any difficulties in building it?

i no longer have the time to finish this project so i couldnt work on it if you bought it. thats why its for sale.

[Tmax]

how about a 91 Mercedes 600 sel amg v12 430 hp. 400 ft/lbs it has amg suspension and exhaust 19 wheels and fat Yokohama(new) tires rated to 300 km/h


thats a cool car man. i know we already talked but post some pics of the car. i dont think i have ever seen a 600 sel with amg package.

[gavman]

thats a cool car man. i know we already talked but post some pics of the car. i dont think i have ever seen a 600 sel with amg package.

That's the ultimate gangsta car in Whalley....:cool:

[onei]

Hey Sas

That's quite the toy,
but before I consider taking on another project of this size I was wondering how hard was it to get a class three license in order to drive it?

[Tmax]

Hey Sas

That's quite the toy,
but before I consider taking on another project of this size I was wondering how hard was it to get a class three license in order to drive it?

i dont have a class 3. technically you require a class 3 since it has 3 axles but it does not have air brake so not any diffrent to drive than regular vehicle.

[ryanmacneil8448]

sell me a york? i may have a big bastard pto winch i could throw in for trade also would you happen to have any 12.5r20 tires?

[Tmax]

ya i have one 12.5 tire.

[kore]

Technically you do need a class 3 license to operate this vehicle. To get it you need to get your learners, then pass the ICBC road test. You just need to provide a vehicle for it, which if you bought that 6x6, it would fit the bill. Also since it doesnt have airbrakes you dont need an airbrake certificate. But you still do need the class 3, the airbrake endorsement is a seperate thing altogether.
very cool truck, if I had the money I would not hesitate. That is just not going to happen for me anytime soon.

[boogyman]

WOW that's An awsome Rig Man If I had any chance of afording it wow I already have a Class 1 so noworries on driving it lol Nice toy.

[cambo]

sorry, i do not have any pics on my computer

[Daddy Style]

Sorry to hear you can not complete. Looks like you were doing it right.

Do you get to keep your old mog at least.

[cambo]

did you get my pm?

[cambo]

post that pic if you want...it is a very crappy pic that does no justice to the look of this car!!

[Tmax]

your 600 is actually really cool.


we're not doing any deals but here is cambo's car.

[Tmax]

still for sale. this thing would make a great association maintanace vehicle;)

[240 Jordy]

How come 90% of all pictures of vehicles on here are taken at Stave? . . . . . LOL!













*

[Tmax]

ok im getting tired of looking at it every day. price is OBO.

[Tmax]

price change. 10 grand takes it or 8 without the tires.

[cambo]

i thought you were going to wait to hear from me? i am just waiting for 1 more financial paper before i can complete things. cambo

[jeeper]

i thought you were going to wait to hear from me? i am just waiting for 1 more financial paper before i can complete things. cambo

I wouldnt be complaining :) It looks like the price dropped 2 grand :)

Good luck on the purchase , I sure hope someone local gets this as Id like to see it out on the trails !

Bruce

[cambo]

it was not a complaint, and has nothing to do with you.

[Tmax]

price change. 10 grand takes it or 8 without the tires.

oh ok. like i said before, i like to get it out of my way. call me and let me know whats going on. 604-722-0175

:beer

[Tmax]

TTT.......

[Tmax]

i think i need to hire J20 to ttt this tread every couple of days.

[Greg]

i think i need to hire J20 to ttt this tread every couple of days.
I wouldn't worry about that; I think everyone who might want it already knows about it.

Greg

[thedjjack]

Try this group totally meets their needs:

http://www.expeditionportal.com/forum/

Good luck with it....

[J20]

i think i need to hire J20 to ttt this tread every couple of days.


LMAO.....................:laugh:laugh:laugh

[Tmax]

Try this group totally meets their needs:

http://www.expeditionportal.com/forum/

Good luck with it....

yes i have been to that site a few times. good place but i just like to sell it locally if i could.

[J20]

TTT............u going to pay me for this Sas...............:rolleyes:

[Tmax]

TTT............u going to pay me for this Sas...............:rolleyes:



thanks bud. and yes i will pay you for sure if it sells :poke::D

[Bronco Boy]

Maybe he can sell your junk quicker than he sold his junk. :poke:




































I don't care who you are.....that there was funny! :laugh

:p:clown:D:cwm25::cwm16::popcorn

[J20]

ready to go wheelin Chris......................:finger_1::finger_1:

[Bronco Boy]

ready to go wheelin Chris......................:finger_1::finger_1:
That's nice. Kick a guy while he's down. :shakehead: :D

[J20]

LOL.............. :sorrysign:;)

[jeeper]

Whats do you charge for this service? Does the price go lower for multiple posts?

[J20]

a beer a bump................:clown

[Tmax]

here you go: :beer

[camoburban]

That's nice. Kick a guy while he's down. :shakehead: :D

but I heard your always going down

[J20]

TTT............:rolleyes:

[Bronco Boy]

but I heard your always going down
Sorry, what was that? I'm busy sipping on my free Tim Horton's coffee. :D

Hey Sass, wanna trade for a sweet blue Bronco? Needs some work? :laugh

[jeeper]

Hey Sass, wanna trade for a sweet blue Bronco? Needs some work? :laugh


I havent heard of this elusive creature?

Could you please inform me of this yet to be discovered creature !

Bruce

Im sure its along the myths of a Sasquatch and Ogo Pogo

:) Bruce

[Tmax]

if its like ogopogo i may be interested.

[J20]

sorry Sas ive been slacking..........................TTT...:cwm30:

[Tmax]

thansk dude. i forgot too.

[Tmax]

ok i realy realy like to sell this thing. $8000 without tires.

[desteurm]

:beer BUMP

[J20]

:beer BUMP

hey thats my job.............

[NM_Mogman]

ok i realy realy like to sell this thing. $8000 without tires.

Is the price USD? How much more would it take to get it on the road? What sort of mileage do you expect to get on it MPG? This truck looks like it would be a great platform for work truck/wheeler/camper/expedition!:cwm30: Does this truck have an intercooler? What is the power output?

[desteurm]

Is the price USD? How much more would it take to get it on the road? What sort of mileage do you expect to get on it MPG? This truck looks like it would be a great platform for work truck/wheeler/camper/expedition!:cwm30: Does this truck have an intercooler? What is the power output?

For the most part, it looks like it's pretty much finished.

:D

[Tmax]

:beer BUMP

hey thats my job.............

thanks guys
:beer

Is the price USD? How much more would it take to get it on the road? What sort of mileage do you expect to get on it MPG? This truck looks like it would be a great platform for work truck/wheeler/camper/expedition!:cwm30: Does this truck have an intercooler? What is the power output?


the price is in canadian dollars. the truck was ment to be used for expedition trips. the power plant is 3.8 litre turbo none intercooled rated at 140 horsepower. you can up it to 210 with addition of intercooler (factory option) so the milage should be very good. a skilled technician should be able to finish it in no time.

[NM_Mogman]

the price is in canadian dollars. the truck was ment to be used for expedition trips. the power plant is 3.8 litre turbo none intercooled rated at 140 horsepower. you can up it to 210 with addition of intercooler (factory option) so the milage should be very good. a skilled technician should be able to finish it in no time.

Would you email me please? NM_Mogman@yahoo.com

The truck looks like it is pretty much ready for the road. I would like to know what it would take for me to get it going. I would be doing the work by myself and maybe some help from a mechanic friend of mine.

Phil

[Tmax]

Would you email me please? NM_Mogman@yahoo.com

The truck looks like it is pretty much ready for the road. I would like to know what it would take for me to get it going. I would be doing the work by myself and maybe some help from a mechanic friend of mine.

Phil

phil you can just call me. 604-722-0175.

where abouts are you? this truck is located in bc canada.

[NM_Mogman]

I am in New Mexico. I will give you a call tomorrow if that would be ok with you.

[gavman]

Is that near Whalley?

[Tmax]

I am in New Mexico. I will give you a call tomorrow if that would be ok with you.


cool
:beer

[desteurm]

Is that near Whalley?

closer to Newton i think

[TUNABOMBER]

bump for coolness

[TCZuki]

thats a fricken long haul from here to NM!! it will be past due for service when he gets home HAHA!! good luck!!

[Tmax]

thats a fricken long haul from here to NM!! it will be past due for service when he gets home HAHA!! good luck!!


its not a Zuki :poke: :clown


actually i realy like to sell it locally so it gets to be used around here.

[desteurm]

:beer

[Tmax]

thanks.

:beer_cheers:

[Tmax]

ok one more try and this thing is going to the scrapper. :eek:

[Reaper]

I know a scrap yard that would take it ;):D

[cambo]

hey, my shop is going up in the next couple of weeks...can you hold off a bit?

[Maelthra]

If it's goin to the scrapper I'll haul it there for you. ;)

[Tmax]

hey, my shop is going up in the next couple of weeks...can you hold off a bit?

call me cam. a deposit would be nice.

:beer

[canucksafari]

Have you tried advertising it on Expedition Portal? Seems to me you got one of the nicer bases for an expo unit.

http://www.expeditionportal.com/forum/forumdisplay.php?f=37

Edit: I see Bruce posted it some time ago. I've bumped it to the top.

[Tmax]

Have you tried advertising it on Expedition Portal? Seems to me you got one of the nicer bases for an expo unit.

http://www.expeditionportal.com/forum/forumdisplay.php?f=37

Edit: I see Bruce posted it some time ago. I've bumped it to the top.

unfortuantly, i dont have time to deal with international buyers. local guy has to come and take it away.

[epic3]

unfortuantly, i dont have time to deal with international buyers. local guy has to come and take it away.

I'll just come and take it

[Tmax]

are you local?:poke:


come and take and and dont forget to bring cash. :canadian

[jeeper]

are you local?:poke:


come and take and and dont forget to bring cash. :canadian

Hes not local , just loco :)

Bruce

[86k20]

is the Hino still available? please email me a number I have a customer who may need the truck to do pipeline work.

[Tmax]

you can call me at 604-722-0175.

[Kinslayer]

:worthless_without_p


more anyway

[Tmax]

i wish i could but some of the stuff is just top secret classified crap. :p

[Kinslayer]

so yer like the Soviets - top secret technologies available to the highest bidder

heh

[Tmax]

so yer like the Soviets - top secret technologies available to the highest bidder

heh

yes something like that. i also accept beer.

[Mike Wild]

i wish i could but some of the stuff is just top secret classified crap. :p


I've got secret spy pics of the the 'top secret' stuff, I'll start the bidding at say.... a six pack? :D

[Tmax]

I've got secret spy pics of the the 'top secret' stuff, I'll start the bidding at say.... a six pack? :D

i'm not surprized. with this kinda technology, there are alway spyes out there trying to make a buck.

[toygasm]

wow is that thing ever sweet!!!i wish i could afford it.id put a tilt car hauler on it to carry my yota around.

[rezdiver]

any interest in a Bombardier/VW Iltis with 1/4t trailer.

rezdiver@yahoo.com

cheers,
Reza
http://rezdiver.usedvictoria.com/

[Mike Wild]

any interest in a Bombardier/VW Iltis with 1/4t trailer.

rezdiver@yahoo.com

cheers,
Reza
http://rezdiver.usedvictoria.com/

that sounds like an interesting trade! :welder

[Tmax]

any interest in a Bombardier/VW Iltis with 1/4t trailer.

rezdiver@yahoo.com

cheers,
Reza
http://rezdiver.usedvictoria.com/

how many of them do you have? just one? or at least 4 or 5

[Mike Wild]

how many of them do you have? just one? or at least 4 or 5


but aren't they German engineered? You'd think one would be enough! :D :D :D

[rezdiver]

only got the one at the moment. I can get you more.

"at least 4 or 5"
I take that as a no then. I was not looking for a straight trade. wanted to see if you had any interest partial against your 10k.

cheers,
Reza
http://rezdiver.usedvictoria.com/

[Tmax]

only got the one for now.

"at least 4 or 5"
I take that as a no then. I was not looking for a straight trade. wanted to see if you had any interest partial against your 10k.

cheers,
Reza
http://rezdiver.usedvictoria.com/



sorry i was being an ass. lol

but no. 10 grand is a very good deal for the hardware and parts invloved so the trade has to be a very good deal as well. one can not expect full retail price versus a good deal.

so what is a killer price for a iltis with trailer?

[Tmax]

something like a landrover defender or g wagon would be cool. hell i'll even consider a landrover 101. a pinzaguer would also be nice.

[rezdiver]

as a general 4-5k for iltis and trailer with no cancer just needing prep and paint with milage under 50k is starting to be fair market.
This is not for my truck,
they used to be worth 1-3k for a good truck when they first came out but a bunch of wankers started to jack up the prices and sell these thing by the dozen a while ago which has brought the retail to 7-10k just for the truck and a crazy 1200-1500 for the dinky trailers, which is rediculous, and they say that they have rebuilt them which usually means they painted it with tremclad and covered the rust with bondo and steel checker plate and sell them to some poor unsuspecting soul. they are so simple to restore, i dont know why they dont do them properly.

I am not sure what a killer deal would be it all depends on what its worth to the buyer. a deal for me would be a truck trailer and a couple of grand worth of parts for under 5k.

[Tmax]

i will consider if but probably not since i already have other things on the go,

thanks, Sasan
:beer

[Bronco Boy]

Does it have any places to hide your beer when you hit the trails? http://www3.telus.net/cbradley/Smileys/brownbag.gif

[Mike Wild]

Does it have any places to hide your beer when you hit the trails? http://www3.telus.net/cbradley/Smileys/brownbag.gif

you don't need it Chris, seeing as how the bronco never leaves your drive way, you'd be consuming alcohol at your residence! :D :D :D :p

[Bronco Boy]

you don't need it Chris, seeing as how the bronco never leaves your drive way, you'd be consuming alcohol at your residence! :D :D :D :p
:finger_1:

[jacko]

http://carphotos.cardomain.com/ride_images/1/2487/1361/6215680081_large.jpg

http://carphotos.cardomain.com/ride_images/1/2487/1361/6215680075_large.jpg

Trade? (not including the sleds)

[Tmax]

i'm assuming youre riffering to the ford. if so has it ever been wheeled and what is it?

[Reaper]

are you ready to part it out yet

[Tmax]

probably. what part do you need?

[Reaper]

engine what model is it
I might be interested if I can find out what tranny will bolt up to it

[jacko]

you have a pm

[Tmax]

you have a pm

thanks jacko. just checked out the specs on your truck. at this point, i like to get some cash enless i trade for something i realy need. what do you think is the cash value of your truck?

[Tmax]

engine what model is it
I might be interested if I can find out what tranny will bolt up to it

the motor is W04CTI. the bellhousing patter is one of the standard sea or something liek that so it bolts up to many patterns. i susspect the bellhousing will fit many standard trany's. i think right now it has a saganaw transmission with the super low 7.5:1 first gear. i just found this. kinda interesting.


http://forum.ih8mud.com/hardcore-corner/18351-hino-w04c-ti-swap.html

[rac]

Is your Hino still available? If so, where are you located? I am in Canmore, Alberta.
Rob

[Tmax]

Is your Hino still available? If so, where are you located? I am in Canmore, Alberta.
Rob


yes rob it is still available for sale. its located in van bc.

[Tmax]

you can call me at 604-722-0175 if you have any questions.

[cambo]

glad it is still in one piece ...there is still hope!!!!

[Tmax]

:confused2

[240 Jordy]

Ha Ha!

Makes the flat deck look tiny!!!


Does the proud new father have in his driveway yet?




:canadian

[240 Jordy]

. . . . . And change your signature to this one:

http://bb.bc4x4.com/showthread.php?t=146742&highlight=wood+stove



:beer_cheers:


:canadian

[J20]

finnally sold it Sas.............congrats dude

[Reaper]

that thing would have been cool I hope it at least stayed local
would love to see it in action

[Bronco Boy]

Woo-hoo! I hope she went to a good home.

[240 Jordy]

Woo-hoo! I hope she went to a good home.

I think it did.

The only problem is will we ever see it finished and out on some trails???




:canadian

[Reaper]

I am sure they guy or gal who bought it will be out on the trails with it once their done

building is not as much fun as roaming the trails as I have found out

[240 Jordy]

Yup!

Winter is for building / upgrading.

Spring, Summer, Fall is for Wheeling, Camping and fun with Friends.

Speaking of which, When are we going out again?







:canadian

[Tmax]

you guys should get a room. here is another pic.

[240 Jordy]

Na!

I wanna see picks of the project that replaced the Hino.

And I don't mean the Wood Stove!!!!







:canadian

[Bronco Boy]

I am sure they guy or gal who bought it will be out on the trails with it once their done
That's what the last owner said. :shakehead: :D

[240 Jordy]

Ya but the new owner realy gets out and WHEELS!!!



Not just web wheels!!!







:poke: :poke: :poke:





:canadian

[marcveinotte]

you guys should get a room. here is another pic.

Was it Rob the the investment dude from Canmore who finally got it? I met him this past winter on a business lunch. I was invited to hang along as I was the resident 4x4 and expedition vehicle dude. SO I told him all about your truck and showed it to him on here.

Anyway ...all mog obsessed and expedition camper obsessed he had to look at my Swiss 404 before I sold it, and had a lunch to discuss all the possibilities of all sorts of stuff. Told him about your truck and how it was totally awesome and i'd had wanted to trade the mog for it and keep it for myself. In the end... I would not have been able to finish it the way he wants to. Hope it was him who got it...Money is no object it will be done 100% and 100% correctly..you'll see it out there for sure.

Guess he finally wised up and grabbed it...damn it where's my cut :)

[Reaper]

Yup!

Winter is for building / upgrading.

Spring, Summer, Fall is for Wheeling, Camping and fun with Friends.

Speaking of which, When are we going out again?







:canadian

I would love to get out again soon and do more exploring
but have to build up the bank again lol
every week the kid comes home with more notices for more things that need money I wish they would make one notice with on totlal and quite suprising me with all these little ones

[Reaper]

looks like it has two stacks coming out of the diffs

and would be real cool with a nice tent trailer on it and some detroits in the axles

did those yorks go with it or did you keep them ?

[Maelthra]

That poor little deck truck looks a tad overloaded...:mullet

[Bronco Boy]

Ya but the new owner realy gets out and WHEELS!!!



Not just web wheels!!!







:poke: :poke: :poke:





:canadian
Hey, not my fault that I've already wheeled the crap out of my junk while your still playing with your IFS.

You best try and catch up. :poke: :laugh

[240 Jordy]

Hey, not my fault that I've already wheeled the crap out of my junk while your still playing with your IFS.

You best try and catch up. :poke: :laugh

Sorry Chris, I was refering to the Seller.




And the 1 Tons should be going in soon, if all goes well.






:canadian

[Kinslayer]

Sorry Chris, I was refering to the Seller.




And the 1 Tons should be going in soon, if all goes well.






:canadian


ahaha I think he gets a little sensitive about people talkin about web wheelin'..

methinks he doth protesteth too much

[240 Jordy]

:agree: :agree: :agree:













:canadian

[Bronco Boy]

Sorry Chris, I was refering to the Seller.
Ah, ok. My apologies if I insulted your IFS arse. :laugh

[Tmax]

And the 1 Tons should be going in soon, if all goes well.



:canadian


i'm sure kris will love the 1 tons. so what are you getting for yourself? :poke:

[240 Jordy]

Ah, ok. My apologies if I insulted your IFS arse. :laugh

I takes a lot more than that to insult me. . . . . . . . At least my IFS gets out and hits the trails. Not like it sits in my driveway rusting away!!! :poke:



i'm sure kris will love the 1 tons. so what are you getting for yourself? :poke:


For me? I picked up Steve Dillen's 33" MTRs, and a rear bumper with swing away for the Jeep.



:canadian

[Reaper]

I takes a lot more than that to insult me. . . . . . . . At least my IFS gets out and hits the trails. Not like it sits in my driveway rusting away!!! :poke:






For me? I picked up Steve Dillen's 33" MTRs, and a rear bumper with swing away for the Jeep.



:canadian

yet ya cant make ity over the bridge to pick up a free dana 60 tie rod set :poke:

[Tmax]

yet ya cant make ity over the bridge to pick up a free dana 60 tie rod set :poke:


that guy is just all talk.

[Bronco Boy]

I takes a lot more than that to insult me. . . . . . . . At least my IFS gets out and hits the trails. Not like it sits in my driveway rusting away!!! :poke:
No, no, no. She rusted before she hit the driveway. :laugh

On the positive.......think of the fuel money I'm saving! :D

[240 Jordy]

yet ya cant make ity over the bridge to pick up a free dana 60 tie rod set :poke:

Hey! I was waiting till I bring down the saw for you!


Shouldn't you be working????





On the positive.......think of the fuel money I'm saving! :D

That's funny! We bought the TJ with the fuel savings from changing the Burb from a DD to a weekend only rig, only to find out the the 4.0 Liter gets the same sh!tty gas mileage, and now it's costing me more cash with lift, tires, armor etc. etc. etc!




:canadian

[Reaper]

Hey! I was waiting till I bring down the saw for you!


Shouldn't you be working????





That's funny! We bought the TJ with the fuel savings from changing the Burb from a DD to a weekend only rig, only to find out the the 4.0 Liter gets the same sh!tty gas mileage, and now it's costing me more cash with lift, tires, armor etc. etc. etc!




:canadian


shouldnt you be working to lol
ya I forgot about the saw thing lol

wait shouldnt we all be working (I havent even gotten my hands dirty yet today slow as crap) more fun checking out my options as a board suporter

[desteurm]

That's funny! We bought the TJ with the fuel savings from changing the Burb from a DD to a weekend only rig, only to find out the the 4.0 Liter gets the same sh!tty gas mileage, and now it's costing me more cash with lift, tires, armor etc. etc. etc!:canadian


Ha Ha:)

[Kinslayer]

That's funny! We bought the TJ with the fuel savings from changing the Burb from a DD to a weekend only rig, only to find out the the 4.0 Liter gets the same sh!tty gas mileage, and now it's costing me more cash with lift, tires, armor etc. etc. etc!
:canadian


REALLY? Mine doesn't.. I mean it's no sprint but it's no suburban that's for SURE

[Tmax]

. . . . . And change your signature to this one:

http://bb.bc4x4.com/showthread.php?t=146742&highlight=wood+stove



:beer_cheers:


:canadian


too late. got rid of it already

[Tmax]

Hey! I was waiting till I bring down the saw for you!


Shouldn't you be working????





That's funny! We bought the TJ with the fuel savings from changing the Burb from a DD to a weekend only rig, only to find out the the 4.0 Liter gets the same sh!tty gas mileage, and now it's costing me more cash with lift, tires, armor etc. etc. etc!




:canadian

if you want economy, you should look into industrial diesels. sorta something like a 6x6 hino.

[Reaper]

I love diesels great economy simple design way less electrical

and cool parts

[240 Jordy]

REALLY? Mine doesn't.. I mean it's no sprint but it's no suburban that's for SURE

I'm not totally serious. My point was that it's not saving me any money as I'm now slowly building it so I can still wheel something while the Burb goes under the knife (torch).






:canadian

[Reaper]

I'm not totally serious. My point was that it's not saving me any money as I'm now slowly building it so I can still wheel something while the Burb goes under the knife (torch).






:canadian

giter done :welder:welder:welder:welder:welder:welder

[240 Jordy]

giter done :welder:welder:welder:welder:welder:welder

Ya Once you make room in your drive way!!!


Still gota build the axles and get the rest of the bits and pieces!





:canadian

[beerwagon302]

that thing is ****in cool man

[Reaper]

Ya Once you make room in your drive way!!!


Still gota build the axles and get the rest of the bits and pieces!





:canadian

oh I have lots of room I can park my two trucks on the lawn and send the wife out and the driveway would be empty
:beer_cheers:

[Tmax]

hmm. ya i got lots of room too.

[240 Jordy]

oh I have lots of room I can park my two trucks on the lawn and send the wife out and the driveway would be empty
:beer_cheers:

hmm. ya i got lots of room too.

What the Hell! Is this a bidding war to see who's place I can use to do the SAS?

Hmmm, Sass does have a roof on his shop and might be in need of some friendship as he seams to be loosing some lately. . . . LOL!

I still need to build the axles and collect a few more parts before we can plan any kind of date.

Sass, did you get the cab yet?


:canadian

[Reaper]

What the Hell! Is this a bidding war to see who's place I can use to do the SAS?

Hmmm, Sass does have a roof on his shop and might be in need of some friendship as he seams to be loosing some lately. . . . LOL!

I still need to build the axles and collect a few more parts before we can plan any kind of date.

Sass, did you get the cab yet?


:canadian

yup!!!;)

but your right sass does have a roof
dam I better win the lottery soon
i'd build a shop big enough to house 2 big big projects and 2 smaller ones and still have room for a bar and rooms and parts and ect ect ect

[Tmax]

sorry i should have been more clear. i ment to say i got tons of room for me.:poke:

[240 Jordy]

sorry i should have been more clear. i ment to say i got tons of room for me.:poke:

NICE!!! :poke:

Gee Gerry, I guess you win!!!


:beer_cheers:

:canadian

[Tmax]

dont worry. i will come and supervise.

[240 Jordy]

dont worry. i will come and supervise.

As long as you bring your 220V Mig, I'll bring the Coronas!!!







:canadian

[Tmax]

hmmm. that thing is a pig.

[powerwagon05]

If its still there this week end I might be interested in having a look at it.

[Reaper]

it does make the tow truck look small you could see the head lights over the his light bar

[Tmax]

If its still there this week end I might be interested in having a look at it.


i can arramge for some viewing but it wont be free. i think around $95 you can get to look at it for about half hour or $175 for full hour.

[Mike Wild]

I'd spring for the full hour if I was you, there's so much to see on that rig that you'll never fit it all in in half an hour.

[240 Jordy]

I'd spring for the full hour if I was you, there's so much to see on that rig that you'll never fit it all in in half an hour.

:withstupid: I've seen it! :withstupid:





:canadian

[zedjay95]

so where are the new updates is it finished yetor are we onto a new truck already

[d0ubledown]

check expeditionportal.com

[Cody1771]

check expeditionportal.com

i thought he pulled the article from ExPo? i tried looking it up and it was missing, and his profile shows no threads. alot of critics there.

[d0ubledown]

hmm..weird. i vaguely remember looking for that thread again also, so i could link it to sass..didnt think much of not being able to find it...

definitely lots of critics there. unless you're in a built D90 or 110 with loaded AT..you're not much of anything :laugh i kid...

[Tmax]

i never posted it on expedition portal. i think someone else did and i responded a few times.

[d0ubledown]

the buyer did. he posted the same pics of your 6X on the tow truck...

[Tmax]

LOL. well i guess he can post up the link since he is on this board. lol

this is all i have ever seen

http://www.expeditionportal.com/forum/showthread.php?t=24407&highlight=hino