Some Junk I don't need but you might?

[jamesot]

Doing a shed clean out....Make an offer on anything you may want/need. Offers of cash, parts, beer or free will be considered. Everything is in NorthVan.

XJ front drive shaft from a 4.0L/manual trans.
XJ Rad post '91 (no leaks, no cap)
XJ Dana 30 unit bearings (have a few lying around)
XJ 4.0L alternators (2)
XJ 4.0L Starters (2)
XJ Misc. bolts and nuts (if you need any let me know and I'll look)
C8.25 homemade diff gaurd (made from bar stock and bolt on, looks like BDS one)
C8.25 Axle Housing and 3.07:1 gears (NO shafts or yoke)
Some beat up torched off mounts for RE longarms (?)
NP231 output shaft and tail housing (leftover from SYE, good as spares)
2" jeep coil spacers
XJ Misc. leafs (pretty much 2 packs minus 1 leaf ea.)
XJ Rear swaybar
1 Rancho 9000 shock (part#9187)
XJ grill and light housings (Burgundy)
1 Truxus MT 31x10.5x15 20-30% (had as a spare when I had 31's, 32's and 33's for a while)

Some things I need are:

Pitman arm from a Grand Cherokee
Black Mirrors from a '97 and up Cherokee (power or manual)
Stock XJ tailpipe in good shape
Someone with a tube bender who likes beer:beer_cheers:

I will pay cash for any of the above.

[Kinslayer]

Could be interested in a good unit bearing, starter as spares.. I have some jeep **** around and my buddy has a tube bender he might want to do a bend or two with.. a 1.5inch die is all he has currently though.

[jamesot]

what jeep **** do you have lying around? The only die I would need is a 1.5". Need to make some bumpers and sliders for the wife's Trackick.

[Kinslayer]

Not sure..nothing too major, I have a bellhousing and gear for an external slave, an RV comp cam for a 4L..quick discos.. a few things.

I'll ask my buddy if he's interested in lending out his bender.

[RoadKill]

if your ever out chilliwack way,i'll swap ya my pitman arm for your coil spacers :redneck

[northfacetravel]

Can I have your front driveshaft? I have a tailpipe from a 94' 4L

[J20]

u got pm...............empty ur pm box dude...........i want the spacers if u still have them ..................how muchy????

Brian

[jamesot]

J20 - you can consider them yours. I will empty the box.
NorthFace - If that pipe is in good condion (like you can still weld to it without grinding off 1/4" of rust) then you got a deal

[bcredxj]

I would like your rear end how much to come and play (beer,cash?) :sorrysign:

[jamesot]

J20 - dibs on coil spacers and ....
BCredXJ - beer or cash for the axle housing....send me a PM
Northfacetravel - I would be into a swap if the pipe is in good condition
KinSlayer - if you want a unit bearing or 2 and a starter send me a PM. I might be into the compcam I'll have to see what it would do to the power curve).

Guys let me know.
James